Presetupă metalică (filet metric/Pg/Npt/G)
Presetupă metalică (filet metric/Pg/Npt/G)
Introducere
Presetupele sunt utilizate în principal pentru a prinde, fixa, proteja cablurile de apă și praf. Ele sunt aplicate pe scară largă în domenii precum plăci de control, aparate, lumini, echipamente mecanice, trenuri, motoare, proiecte etc.Vă putem furniza presetupe metalice din alamă nichelată (Nr. comandă: HSM), oțel inoxidabil (Nr. comandă: HSMS) și aluminiu (Nr. comandă: HSMAL).
| Material: | Corp: alama nichelata; etanșare: poliamidă; etanșare: cauciuc modificat |
| Interval de temperatură: | Min -40℃,Max 100℃,Pe termen scurt 120℃ |
| Grad de protectie: | IP68(IEC60529) cu inel O adecvat în domeniul de prindere specificat |
| Proprietăți: | Rezistenta la vibratii si impact, in conformitate cu IEC-60077-1999. |
| Aplicatii: | Construcție mașini, echipamente electrice, dulap de comandă electrică |
| Certificari: | CE, RoHS, UL |
Caietul de sarcini
(Vă rugăm să ne contactați pentru mai multe informații dacă aveți nevoie de alte dimensiuni care nu sunt incluse în lista următoare.)
| Presepe cablu din alamă placată cu nichel (filet metric) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Articolul nr. | Fir | Domeniu de prindere | AG | GL | H | Dimensiunea cheii | Pachet |
|
| Dimensiune | mm | mm | mm | mm | mm | unitati |
| HSM-M8 | M8x1.0 | 3~5 | 8 | 6 | 19 | 14/14 | 50 |
| HSM-M10 | M10x1.0 | 3~6.5 | 10 | 6 | 19 | 14/14 | 50 |
| HSM-M12 | M12×1,5 | 3~6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-M16-H | M16×1,5 | 3~6.5 | 16 | 7 | 20 | 14/18 | 75 |
| HSM-M16 | M16×1,5 | 4~8 | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16-D | M16×1,5 | 5~10 | 16 | 7 | 22.5 | 20/20 | 50 |
| HSM-M18 | M18×1,5 | 5~10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-M20-H | M20×1,5 | 5~10 | 20 | 7 | 22.5 | 20/22 | 32 |
| HSM-M20 | M20×1,5 | 6~12 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20-D | M20×1,5 | 8~14 | 20 | 7 | 23 | 24/24 | 32 |
| HSM-M22 | M22×1,5 | 8~14 | 22 | 7 | 23 | 24/24 | 32 |
| HSM-M24-H | M24×1,5 | 6~12 | 24 | 7 | 23.5 | 24/27 | 32 |
| HSM-M24 | M24×1,5 | 8~14 | 24 | 7 | 23 | 24/27 | 18 |
| HSM-M25-H | M25×1,5 | 8~14 | 25 | 7 | 23 | 24/28 | 18 |
| HSM-M25 | M25×1,5 | 10~16 | 25 | 7 | 24.5 | 28/28 | 18 |
| HSM-M25-D | M25×1,5 | 13~18 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M27-H | M27×2.0 | 10~16 | 27 | 8 | 24.5 | 28/30 | 18 |
| HSM-M27 | M27×2.0 | 13~18 | 27 | 8 | 26 | 30/30 | 18 |
| HSM-M30-H | M30×2.0 | 10~16 | 30 | 8 | 24.5 | 28/34 | 18 |
| HSM-M30 | M30×2.0 | 13~18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-M32-H | M32×1,5 | 13~18 | 32 | 8 | 26 | 30/36 | 18 |
| HSM-M32 | M32×1,5 | 15~22 | 32 | 8 | 28 | 36/36 | 18 |
| HSM-M32-D | M32×1,5 | 18~25 | 32 | 8 | 33 | 40/38 | 8 |
| HSM-M33 | M33×2.0 | 18-25 | 33 | 8 | 33 | 40/38 | 8 |
| HSM-M36-H | M36×2.0 | 15~22 | 36 | 8 | 28 | 36/40 | 8 |
| HSM-M36 | M36×2.0 | 18~25 | 36 | 8 | 33 | 40/40 | 8 |
| HSM-M40-H | M40×1,5 | 18~25 | 40 | 9 | 33.5 | 40/45 | 8 |
| HSM-M40 | M40×1,5 | 22~30 | 40 | 9 | 35.5 | 45/45 | 8 |
| HSM-M40-D | M40×1,5 | 22~32 | 40 | 9 | 38,5 | 50/50 | 4 |
| HSM-M42 | M42×2.0 | 22~32 | 42 | 9 | 38,5 | 50/50 | 4 |
| HSM-M48 | M48×2.0 | 22~32 | 48 | 9 | 38,5 | 50/52 | 4 |
| HSM-M50 | M50×1,5 | 30~38 | 50 | 9 | 40 | 58/55 | 4 |
| HSM-M56 | M56×2.0 | 30~38 | 56 | 9 | 40 | 58/60 | 4 |
| HSM-M60 | M60×2.0 | 37-44 | 60 | 10 | 41 | 65/65 | 2 |
| HSM-M63 | M63×1,5 | 37~44 | 63 | 10 | 41 | 65/70 | 2 |
| HSM-M63-D | M63×1,5 | 42~53 | 63 | 10 | 44,5 | 75/75 | 2 |
| HSM-M64 | M64×2.0 | 37~44 | 64 | 10 | 41 | 65/70 | 2 |
|
|
|
| |||||
| Presepe cablu din alamă placată cu nichel (filet metric - dimensiune Jumbo) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Articolul nr. | Fir | Domeniu de prindere | AG | GL | SW1/SW2 | valoarea H | Pachet |
|
| Dimensiune | mm | mm | mm |
|
| unitati |
| HSM-M72-H | M72X2.0 | 52-57 | 72 | 12 | 80/80 | 43 | 2 |
| HSM-M75-H | M75X2.0 | 52-57 | 75 | 12 | 80/80 | 43 | 2 |
| HSM-M80-H | M80X2.0 | 52-57 | 80 | 12 | 80/86 | 43 | 2 |
| HSM-M72 | M72X2.0 | 55-61 | 72 | 12 | 86/86 | 43 | 2 |
| HSM-M75 | M75X2.0 | 55-61 | 75 | 12 | 86/86 | 43 | 2 |
| HSM-M80 | M80X2.0 | 55-61 | 80 | 12 | 86/86 | 43 | 2 |
| HSM-M80-D | M80X2.0 | 60-66 | 80 | 12 | 90/90 | 43 | 2 |
| Presepe cablu din alamă placată cu nichel (Filet metric: filet prelungit) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Articolul nr. | Fir | Domeniu de prindere | AG | GL | H | Dimensiunea cheii | Pachet |
|
| Dimensiune | mm | mm | mm | mm | mm | unitati |
| HSM-M12-L | M12×1,5 | 3~6.5 | 12 | 10 | 19 | 14/14 | 50 |
| HSM-M16-HL | M16×1,5 | 3~6.5 | 16 | 10 | 20 | 14/18 | 50 |
| HSM-M16-L | M16×1,5 | 4~8 | 16 | 10 | 21 | 17/18 | 50 |
| HSM-M16-DL | M16×1,5 | 5~10 | 16 | 10 | 22.5 | 20/20 | 50 |
| HSM-M18-L | M18×1,5 | 5~10 | 18 | 10 | 22.5 | 20/20 | 50 |
| HSM-M20-HL | M20×1,5 | 5~10 | 20 | 10 | 22.5 | 20/22 | 32 |
| HSM-M20-L | M20×1,5 | 6~12 | 20 | 10 | 23.5 | 22/22 | 32 |
| HSM-M20-DL | M20×1,5 | 8~14 | 20 | 10 | 23 | 24/24 | 32 |
| HSM-M22-L | M22×1,5 | 8~14 | 22 | 10 | 23 | 24/24 | 32 |
| HSM-M24-HL | M24×1,5 | 6~12 | 24 | 12 | 23.5 | 24/27 | 32 |
| HSM-M24-L | M24×1,5 | 8~14 | 24 | 12 | 23 | 24/27 | 18 |
| HSM-M25-HL | M25×1,5 | 8~14 | 25 | 12 | 23 | 24/28 | 18 |
| HSM-M25-L | M25×1,5 | 10~16 | 25 | 12 | 24.5 | 28/28 | 18 |
| HSM-M25-DL | M25×1,5 | 13~18 | 25 | 12 | 26 | 30/30 | 18 |
| HSM-M27-HL | M27×2.0 | 10~16 | 27 | 12 | 24.5 | 28/30 | 18 |
| HSM-M27-L | M27×2.0 | 13~18 | 27 | 12 | 26 | 30/30 | 18 |
| HSM-M30-HL | M30×2.0 | 10~16 | 30 | 12 | 24.5 | 28/34 | 18 |
| HSM-M30-L | M30×2.0 | 13~18 | 30 | 12 | 26 | 30/34 | 18 |
| HSM-M32-HL | M32×1,5 | 13~18 | 32 | 12 | 26 | 30/36 | 18 |
| HSM-M32-L | M32×1,5 | 15~22 | 32 | 12 | 28 | 36/36 | 18 |
| HSM-M32-DL | M32×1,5 | 18~25 | 32 | 12 | 33 | 40/38 | 8 |
| HSM-M33-L | M33×2.0 | 18-25 | 33 | 12 | 33 | 40/38 | 8 |
| HSM-M36-HL | M36×2.0 | 15~22 | 36 | 12 | 28 | 36/40 | 8 |
| HSM-M36-L | M36×2.0 | 18~25 | 36 | 12 | 33 | 40/40 | 8 |
| HSM-M40-HL | M40×1,5 | 18~25 | 40 | 15 | 33 | 40/45 | 4 |
| HSM-M40-L | M40×1,5 | 22~30 | 40 | 15 | 35.5 | 45/45 | 4 |
| HSM-M40-DL | M40×1,5 | 22~32 | 40 | 15 | 38,5 | 50/50 | 4 |
| HSM-M42-L | M42×2.0 | 22~32 | 42 | 15 | 38,5 | 50/50 | 4 |
| HSM-M48-L | M48×2.0 | 22~32 | 48 | 15 | 38,5 | 50/52 | 4 |
| HSM-M50-L | M50×1,5 | 30~38 | 50 | 15 | 40 | 58/55 | 2 |
| HSM-M56-L | M56×2.0 | 30~38 | 56 | 15 | 40 | 58/60 | 4 |
| HSM-M60-L | M60×2.0 | 37~44 | 60 | 15 | 41 | 65/65 | 2 |
| HSM-M63-L | M63×1,5 | 37~44 | 63 | 15 | 41 | 65/70 | 2 |
| HSM-M63-DL | M63×1,5 | 42~53 | 63 | 15 | 44,5 | 75/75 | 1 |
| HSM-M64-L | M64×2.0 | 37~44 | 64 | 15 | 41 | 65/70 | 2 |
| Presepe cablu din alamă placată cu nichel (filet PG) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Articolul nr. | Fir | Domeniu de prindere | AG | GL | H | Dimensiunea cheii | Pachet |
|
| Dimensiune | mm | mm | mm | mm | mm | unitati |
| HSM-P07 | PG7 | 3~6.5 | 12.5 | 6 | 19 | 14/14 | 75 |
| HSM-P09-H | PG9 | 3~6.5 | 15.2 | 7 | 20 | 14/17 | 75 |
| HSM-P09 | PG9 | 4~8 | 15.2 | 7 | 21 | 17/17 | 75 |
| HSM-P11 | PG11 | 5~10 | 18.6 | 7 | 22.5 | 20/20 | 32 |
| HSM-P13.5-H | PG13.5 | 5~10 | 20.4 | 7 | 22.5 | 20/22 | 32 |
| HSM-P13.5 | PG13.5 | 6~12 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| HSM-P16-H | PG16 | 6~12 | 22.5 | 7 | 23.5 | 22/24 | 32 |
| HSM-P16 | PG16 | 8~14 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21-H | PG21 | 10~16 | 28.3 | 7 | 24.5 | 28/30 | 18 |
| HSM-P21 | PG21 | 13~18 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29-H | PG29 | 15~22 | 37 | 8 | 28 | 36/40 | 8 |
| HSM-P29 | PG29 | 18~25 | 37 | 8 | 33 | 40/40 | 8 |
| HSM-P36 | PG36 | 22~32 | 47 | 9 | 38,5 | 50/50 | 4 |
| HSM-P42 | PG42 | 30~38 | 54 | 9 | 40 | 58/58 | 2 |
| HSM-P48 | PG48 | 37~44 | 59.3 | 10 | 41 | 65/65 | 2 |
| Presepe cablu din alamă placată cu nichel (filet PG: filet prelungit) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Articolul nr. | Fir | Domeniu de prindere | AG | GL | H | Dimensiunea cheii | Pachet |
|
| Dimensiune | mm | mm | mm | mm | mm | unitati |
| HSM-P07-L | PG7 | 3~6.5 | 12.5 | 10 | 19 | 14/14 | 50 |
| HSM-P09-HL | PG9 | 3~6.5 | 15.2 | 10 | 20 | 14/17 | 50 |
| HSM-P09-L | PG9 | 4~8 | 15.2 | 10 | 21 | 17/17 | 50 |
| HSM-P11-L | PG11 | 5~10 | 18.6 | 10 | 22.5 | 20/20 | 50 |
| HSM-P13.5-HL | PG13.5 | 5~10 | 20.4 | 10 | 22.5 | 20/22 | 32 |
| HSM-P13.5-L | PG13.5 | 6~12 | 20.4 | 10 | 23.5 | 22/22 | 32 |
| HSM-P16-HL | PG16 | 6~12 | 22.5 | 10 | 23.5 | 22/24 | 32 |
| HSM-P16-L | PG16 | 8~14 | 22.5 | 10 | 23 | 24/24 | 32 |
| HSM-P21-HL | PG21 | 10~16 | 28.3 | 12 | 24.5 | 28/30 | 18 |
| HSM-P21-L | PG21 | 13~18 | 28.3 | 12 | 26 | 30/30 | 18 |
| HSM-P29-HL | PG29 | 15~22 | 37 | 12 | 28 | 36/40 | 8 |
| HSM-P29-L | PG29 | 18~25 | 37 | 12 | 33 | 40/40 | 8 |
| HSM-P36-L | PG36 | 22~32 | 47 | 15 | 38,5 | 50/50 | 4 |
| HSM-P42-L | PG42 | 30~38 | 54 | 15 | 40 | 58/58 | 2 |
| HSM-P48-L | PG48 | 37~44 | 59.3 | 15 | 41 | 65/65 | 2 |
| Presepe cablu din alamă placată cu nichel (filet G) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Articolul nr. | Fir | Domeniu de prindere | AG | GL | H | Dimensiunea cheii | Pachet |
|
| Dimensiune | mm | mm | mm | mm | mm | unitati |
| HSM-G3/8 | G3/8″ | 4~8 | 16.66 | 8 | 21 | 17/20 | 32 |
| HSM-G1/2-H | G1/2″ | 5~10 | 20.99 | 8 | 22.5 | 20/24 | 32 |
| HSM-G1/2 | G1/2″ | 6~12 | 20.99 | 8 | 23.5 | 22/24 | 32 |
| HSM-G1/2-D | G1/2″ | 8~14 | 20.99 | 8 | 23.5 | 24/24 | 32 |
| HSM-G3/4-TH | G3/4″ | 6~12 | 26.44 | 8 | 23.5 | 22/30 | 18 |
| HSM-G3/4-H | G3/4″ | 8~14 | 26.44 | 8 | 23 | 24/30 | 18 |
| HSM-G3/4 | G3/4″ | 13~18 | 26.44 | 8 | 26 | 30/30 | 18 |
| HSM-G1 | G1″ | 18~25 | 33.24 | 9 | 33 | 40/40 | 8 |
| HSM-G1 1/4 | G1 1/4″ | 22~32 | 41,91 | 10 | 38,5 | 50/50 | 4 |
| HSM-G1 1/2 | G1 1/2″ | 30~38 | 47,8 | 10 | 40 | 58/55 | 2 |
| HSM-G2 | G2″ | 37~44 | 59,61 | 11 | 41 | 65/65 | 2 |
| Presepe cablu din alamă placată cu nichel (filet NPT) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Articolul nr. | Fir | Domeniu de prindere | AG | GL | H | Dimensiunea cheii | Pachet |
|
| Dimensiune | mm | mm | mm | mm | mm | unitati |
| HSM-N3/8 | NPT3/8″ | 4~8 | 17.05 | 11 | 21 | 17/20 | 50 |
| HSM-N1/2-H | NPT1/2″ | 5~10 | 20.85 | 13 | 23.5 | 20/23 | 32 |
| HSM-N1/2 | NPT1/2″ | 6~12 | 20.85 | 13 | 23.5 | 22/23 | 32 |
| HSM-N1/2-D | NPT1/2″ | 8~14 | 20.85 | 13 | 23.5 | 24/24 | 32 |
| HSM-N3/4-TH | NPT3/4″ | 6~12 | 26.3 | 13 | 23.5 | 22/30 | 18 |
| HSM-N3/4-H | NPT3/4″ | 8~14 | 26.3 | 13 | 23 | 24/30 | 18 |
| HSM-N3/4 | NPT3/4″ | 13~18 | 26.3 | 13 | 26 | 30/30 | 18 |
| HSM-N1 | NPT1″ | 18~25 | 33.15 | 16 | 33 | 40/40 | 8 |
| HSM-N1 1/4 | NPT1 1/4″ | 22~32 | 41,85 | 16 | 38,5 | 50/50 | 4 |
| HSM-N1 1/2 | NPT1 1/2″ | 30~38 | 47,75 | 18 | 40 | 58/55 | 2 |
| HSM-N2 | NPT2″ | 37~44 | 59,55 | 18 | 41 | 65/65 | 1 |
